Optional Hardware

Quick links 

 

DAS3-AES

AES Digital Audio Expansion Module for DASDEC-III models only. Activates separate AES program audio loop with power-off bypass. Balanced 110Ω AES/EBU digital audio with true digital switching synchronized with incoming sample rate, or 48 kHz without reference input. Connections are separate RJ-45s for input and output following StudioHub™ wiring standards. Visit studiohub.com for wiring adapter examples. FACTORY-INSTALLED.

EXP-GPIO-E

 

Expanded GPIO Inputs and Form-A Outputs (reed relay) ONLY available for DAS3-EX or DASDEC-II series /4 & /5. This internal hardware and software option adds 8 more GPIs and 8 more Form-A (reed relay) GPOs, for a total of 10 Inputs and 10 Outputs onboard. Uses one internal expansion slot. FACTORY-INSTALLED For other DASDEC-II series, see EXP-GPIOA or contact the factory.

 

EXP-EAS-E

Expanded EAS Decoder Audio Inputs ONLY available for DAS3-EX or DASDEC-II series /4 & /5. This FACTORY INSTALLED internal hardware and software option adds two extra decoder analog-mono audio input channels for external receivers (not included). Expands EAS monitoring inputs to six (6) total. Uses an internal expansion slot. Please contact the factory regarding upgrading in-field units

EXP-2NICGIG

 

Dual Port Gigabit Ethernet Expansion option ONLY available for DAS3-EX or DASDEC-II /4 & /5 series. This FACTORY INSTALLED option adds two (2) 10/100/1000BASE-T Ethernet ports for a total of three (3) independent network interfaces. Please contact the factory regarding upgrading in-field units.

USB-1NICGIG

 

Single Port Gigabit Ethernet Expansion option. USB expansion option adds one (1) 10/100/1000BASE-T Ethernet port for a total of two (2) unique Ethernet network links. Requires software restart after installation.

 

USB/4RS232

USB to 4 Serial Port Expander – Provides four (4) additional RS-232 serial ports for independent control of multiple serial devices. Used for a variety of applications such as multiple CG's, LED signs, or logo inserters for centralcasting and MultiStation installations. model: USB/4RS232

 

NONOISE-PS 

No Noise (fan-less) Power Supply Option. This FACTORY INSTALLED option provides a high-quality adapter and external fan-less power supply replacing the standard internal switching mode power supply and associated fan. Please contact the factory regarding upgrading in-field units

 

XBOB4

The XBOB4 is a low-cost single-channel analog NTSC video EAS text crawl overlay system. Places the EAS message as crawling text over NTSC program video or black background if no video is present. Uses one DASDEC serial port and works with any of the DASDEC TV packages (DASLPTV, DASLPTVR, DASTV, or DASTVR).

R194 / R194P

 

The R194 is an eight-channel composite video character generator (NTSC or PAL) and balanced stereo audio switch capable of overlaying EAS alert text messages onto program video and switching audio during EAS alerts. Video PGM loop-thru connections are BNC with audio PGM loop-thru connections on pluggable screw terminals. Control is managed by standard RS-232 signaling using DB9-type connectors. Up to 32 R194's can be daisy-chained together to allow EAS service to as many as 255 individual analog channels from a single DASDEC/DASDEC-II. R194 – NTSC video version R194P – PAL video version

R164

Limited quantities of this product are available,
please contact us for availability by email or call +1 585 765 2254

 

Monroe Model R164 Stereo Audio/Video Switch provides a 2x1 (A/B) balanced stereo audiofollow- video or IF/RF switching in a single 1 RU package. The switch responds to contact closure, a transistor switch to ground, or a compatible logic level. Buffered control input eliminates the need for high output current driving devices. Connections are BNC for video and terminal strips for audio.

 

R165A

Model R-165A Audio/Video switch provides four (4) independent switching banks. Each bank features a 2 x 1 (A/B) balanced stereo audio follow video relay and two auxiliary SPDT relays. Separate contact closures control each switch bank. Video relays maintain frequency response to 950 MHz to function as a high-quality IF/RF (A/B) switch. Auxiliary relays 1 & 2 are available and valuable for GPI or SAP audio switching. Connections are "F" for video and terminal strips for audio. Each switch is fully isolated and may require additional DAs to distribute a common signal to all channels. Features 1RU package and optional redundant power supplies.

R177M

 

Monroe R177M Master Baseband Switch is a combination 1x8 stereo audio/composite video distribution amp coupled with eight (8) ganged 2x1 A/V switches. The "master" inputs are buffered and distributed to the "B" side of each A/V switch. Separate control inputs allow independent switching of video and audio. Two recessed test buttons allow video or audio-only testing. Each section is designed for superb isolation and bandwidth. Audio connection via detachable screw terminal barrier strips, videos connect via "F" connectors.

627A

 

Monroe Electronics' Stereo Audio/Video Switch module provides 2x1 (A/B) balanced stereo audio-follow-video switching, responds to a contact closure, a transistor switch to ground, or a compatible logic level. Buffered control input eliminates the need for high output current driving devices. Connections are "F" for video and terminal strips for audio. Features flanges for mounting.

 

RF-PRO-1B

External Amplified AM Broadcast receiving radio antenna. Wide-band amplification with directional control and gain coupling on 75Ω impedance "F" type connectors. Loop is 38" in diameter and includes 12 VDC power inserter and mounting hardware fitting up to 2" poles

 

J55FM

External FM Radio Antenna. Horizontally polarized 5-element Yagi is specifically designed for the FM radio (88-108MHz) frequency range. Offers 6-7dB of gain with 75Ω impedance on "F" type connectors. Fits 1½" to 2" poles.

J56-162

 

External NOAA Weather Radio Antenna. Vertically polarized 5-element Yagi was designed explicitly for the 162MHz NOAA (WX) operating frequency. Offers 7dB of gain with 75Ω impedance on "F" type connectors. Fits 1½" to 2" poles.

AL-FFFF-9

 

This lightning protector is a high-quality 75 Ohm F-Female to F-Female gas discharge tube suppressor featuring wide-band operation up to 3 GHz. The unit's replaceable gas tube element, multi-strike capability, and fast response time make it suitable for a wide range of applications. In addition, both ports are equally protected regardless of how it is installed – either port can face the antenna and either port can face the equipment.

SPECO-PFA

 

Speco Technologies Model PFA external AM/FM tuner with 30 channel presets and 45-day no-power memory. Provides adjustable mono output using the Music-On-Hold feature to supply standard AM or FM monitoring to any DASDEC.