DIGITAL ALERT SYSTEMS | LOW/FULL POWER RADIO | LOW/FULL POWER TV | EOC APPLICATIONS
HOME | RESOURCES | FAQ's
RADIO HOME
  TV HOME
  EOC HOME
   
PRODUCTS
PACKAGES
WHERE TO BUY
   
NEWS
RESOURCES
CUSTOMER
TESTIMONIALS
 
  DASDEC-II
REGISTRATION
  CONTACT US 
ABOUT DAS 
RESOURCES
RESOURCES home | FAQ's | DATASHEETS & MANUALS | BROCHURES
APPLICATION NOTES | LINKS | First Version DASDEC documents & Software
EAS Acronyms | Glossary of EAS Terms | EAS Event Codes
DASDEC-II Registration
 

Email us any new questions you have regarding your Digital Alert Systems equipment or system.

 
Q: How long is your warranty?
 
Q: What are the FCC requirements?
 
Q: How does EAS work?
Q: I’m receiving my Required Monthly Tests from my LP1 and LP2. They show up in the
    log as being decoded. Why are they not being forwarded on to my system?
 
Q: What alerts types have to be forwarded according to the FCC guidelines?
 
Q: How do I get the logs out of the DASDEC if there’s no built in printer?
 
Q: Can the DASDEC be linked to a NTP, Network Time Protocol, server?
 
Q: Do I need to adjust the DASDEC clock during Daylight Savings Time (DST)?
 
Q: Can the DASDEC control my external character generator?
 
To Top og Page
 
Q: Does the DASDEC allow different levels of access into the device?
 
Q: Can I trigger a test alert remotely through the Web interface?
 
Q: How do I determine the DASDEC’s IP address if I’m using DHCP?
 
Q: Does the DASDEC support creating or customizing non-EAS messages?
 
Q: Can the DASDEC be configure to forward or disregard a duplicate alert that was
    received on more than one of the radio sources being monitored?
 
Q: Can the DASDEC be connected to more than one network?
 
Q: How many R190A Network GPO controllers can communicate with a single DASDEC?
 
Q: Where do I find the DASDEC’s S/N and Platform ID in the web interface?
 
Q: Where can I find the software version of my DASDEC?
 
Q: Does the DASDEC provide a way to back up its setup?
 
To Top og Page
 
Q: Can the DASDEC generate its own random Required Weekly Test?
 
Q: Is there a way to tell when my Automatic Random Required Weekly Test will be
    triggered?
 
Q: Can the DASDEC be configured in a Master/Slave configuration?
 
Q: Is there a way to listen to the radio sources?
 
Q: Do I need to setup anything in the DASDEC when connecting a 988 Override Interface
    to it?
 
Q: Can a single DASDEC control a standard Cable system along with an IPTV system?
 
Q: Can the DASDEC be configured for Centralcasting in a Remote/Host configuration?
 

Email us any new questions you have regarding your Digital Alert Systems equipment or system. 

 
To Top og Page
SITE MAP | email-us | 585-765-1155 | fax 585-765-9330 | Copyright © 1999-2010 Digital Alert Systems, All Rights Reserved
a division of Monroe Electronics Inc.