DIGITAL ALERT SYSTEMS | LOW/FULL POWER RADIO | LOW/FULL POWER TV | EOC APPLICATIONS
HOME | PRODUCTS | OPTIONAL HARDWARE
RADIO HOME
  TV HOME
  EOC HOME
   
PRODUCTS
PACKAGES
WHERE TO BUY
   
NEWS
RESOURCES
CUSTOMER
TESTIMONIALS
 
  DASDEC-II
REGISTRATION
  CONTACT US 
ABOUT DAS 
PRODUCTS
EAS ENCODER-DECODERS | RADIO PACKAGES | TV PACKAGES | EOC PACKAGES
OPTIONAL SOFTWARE | OPTIONAL HARDWARE | NETWORKED HARDWARE
 
Go To> DAS3RAD | MPEG2-4 | EXP-EAS | EXP-GPIO | EXP-3NIC | EXP-3NICGIG | USB/4RS232
            R164 | R165A | ST0093 | 627A | 629 | XBOB | R194
 
  DASDEC 3 Radio receiver module. Upgrade any DASCEC without internal radios. Three receivers allow any combination of AM, FM, or NOAA frequencies, tunable and level controlled via the browser interface.

model: DAS3RAD
 
 
  MPEG-2 or 4 hardware and software option - provides EAS in an MPEG 2 or MPEG-4 stream with multiplexed audio Uses internal expansion port, therefore cannot be combined with EXP-EAS, EXP-GPIO options.

model: MPEG2-4 
DATA SHEET (PDF133kb)
 
 

Expanded EAS Decoder Audio Inputs. Internal hardware and software option adds two extra decoder analog-mono audio input channels for external receivers (not included). Expands EAS monitoring inputs to six (6) total. Uses internal expansion port, therefore cannot be combined with MPE2-4 or EXP-GPIO options.

model: EXP-EAS
To Top og Page
 
 
Expanded GPIO Inputs and Outputs. Internal hardware and software option to add 8 more GPIO Inputs and 8 more GPIO Outputs, for a total of 10 Inputs and 10 Outputs onboard. Uses internal expansion port, therefore cannot be combined with MPE2-4 or EXP-EAS options.

model: EXP-GPIO    
To Top og Page
 
 

  Triple Port Ethernet Expansion option
(DASDEC-II ONLY). This FACTORY INSTALLED option adds three (3) additional 10/100bT Ethernet ports for a total of four (4) unique Ethernet network links. Please contact the factory regarding upgrading in-field units

model: EXP-3NIC    
DATASHEET (PDF 282kb)
To Top og Page
 
 

  Triple Port Gigabit Ethernet Expansion option
(DASDEC-II ONLY). This FACTORY INSTALLED option adds three (3) 10/100/1000bT Ethernet ports for a total of four (4) unique Ethernet network links (Note: The standard DASDEC Ethernet port remains 10/100bT). Please contact the factory regarding upgrading in-field units

model: EXP-3NICGIG    
DATASHEET (PDF 282kb)
To Top og Page
 
 
USB to 4 Serial Port Expander – Provides four (4) additional RS-232 serial ports for independent control of multiple serial devices. Used for a variety of applications such as multiple CG's, LED signs, or logo inserters for centralcasting and MultiStation installations. 

model: USB/4RS232  
To Top og Page
 
 

MANUAL (PDF 59kb)
DATA SHEET (PDF 21kb)
FRONT & BACK VIEWS		 Monroe Model R164 Stereo Audio/Video Switch provides 2x1 (AB) balanced stereo audio-follow-video or IF/RF switching in a single 1 RU package. The switch responds to contact closure, a transistor switch to ground, or a compatible logic level. Buffered control input eliminates need for high output current driving devices. Connections are BNC for video and terminal strips for audio.

model: R164  
To Top og Page
 
 

MANUAL (PDF 174kb)
DATA SHEET (PDF 148kb)
FRONT & BACK VIEWS		 Model R-165A Audio/Video switch provides four, independent switching banks. Each bank features a 2 x 1 (A/B) balanced stereo audio follow video relay and two auxiliary SPDT relays. Separate contact closures control each switch bank. Video relays maintain frequency response to 950 MHz to function as a high quality IF/RF (A/B) switch. Auxiliary relays 1 & 2 available useful for GPI or SAP audio switching. Connections are “F” for video and terminal strips for audio. Features 1RU package and optional redundant power supplies. 

model: R165a  
To Top og Page
 
 
  The Model ST0093 Master Baseband Switch is combination 1x8 stereo audio/composite video distribution amp coupled with eight (8) ganged 2x1 A/V switches. The “master” inputs are buffered and distributed to the “B” side of each A/V switch. Separate control inputs allow independent switching of video and audio. Two recessed test buttons allow video or audio only testing. Each section is designed for superb isolation and bandwidth. Audio connection via detachable screw terminal barrier strips, videos connect via BNC connectors. 

model: ST0093 
To Top og Page
 
 

MANUAL (46kb)
DATA SHEET (PDF 21kb)
FRONT VIEW

 Monroe Electronics’ Stereo Audio/Video Switch module provides 2x1 (A/B) balanced stereo audio follow video switching, responds to a contact closure, a transistor switch to ground, or a compatible logic level. Buffered control input eliminates need for high output current driving devices. Connections are “F” for video and terminal strips for audio. Features flanges for mounting 

model: 627a  
To Top og Page
 
 

MANUAL (PDF 20kb)
DATA SHEET (PDF 364kb)
FRONT VIEW

 The Model 629 is a high quality, 1 x 4 stereo audio/ composite video signal distribution amplifier. Well suited for distribution of any composite video signals with a 50 MHz video bandwidth, The audio is designed for superb isolation and bandwidth. Audio connection via detachable screw terminal barrier strips, video connects via 75O “F” connectors. 

model: 629 
To Top og Page
 
 

The XBOB is a low cost single channel analog NTSC video EAS text crawl overlay system. Places the EAS message as crawling text over NTSC program video, or black background if no video is present. Uses one DASDEC serial port and works with any of the DASDEC TV packages (DASLPTV, DASLPTVR, DASTV, or DASTVR).

model: XBOB
To Top og Page
 
 

MANUAL (PDF 2.7mb)
DATA SHEET (PDF 52kb)
FRONT & BACK VIEWS		 The R194 is an eight channel composite video character generator and balanced stereo audio switch capable of overlaying EAS alert text messages onto program video and switching audio during EAS alerts. Video PGM loop-thru connections are BNC with audio PGM loop-thru connections on pluggable screw terminals. Control is managed by standard RS-232 signaling using DB9 type connectors. Up to 32 R194’s can be daisy-chained together to allow EAS service to as many as 255 individual analog channels from a single DASDEC/DASDEC-II. 

model: R194  
To Top og Page
 
SITE MAP | email-us | 585-765-1155 | fax 585-765-9330 | Copyright © 1999-2010 Digital Alert Systems, All Rights Reserved
a division of Monroe Electronics Inc.